Thermoplastic Road Marking Paints (yellow )

Thermoplastic hot - applied road marking paint for the creation of highly reflective line marking with long- term performance. Hot applied Thermoplastic Road Marking Paint is specially formulated with superior quality raw materials. Thermoplastic paint consists of light-colored aggregates, pigment, and extender and glass beads bound together with a thermoplastic resin, plasticized as necessary that becomes liquid when heated at high temperatures. Road paints industries Thermoplastic paint is environment friendly consisting of 100% and containing no solvent. Thermoplastic paint contains no dangerous volatile solvents and is mainly comprised of:
1- Binder is resin or rosin for thermoplasticity
2- Pgiment for Coloring
3- Glass Beads for reflectivity
4- Additives to grant additional properties

25Ks bag. Each bag of Thermoplastic material will be clearly and indelibly marked with the following information
1. Batch number
2. Lot number
3. Date of manufacture
4. Color White / Yellow
5. Max heating and application temprature along with instructions.

Road Paints Industries Manufacture Thermoplastic Road marking paint according to:
• MOT (Saudi Standard),
• AASHTO M-249 (American Standard),
• BS EN 1871 : 2000 & 1436 : 1998 + A1 (European Standard) ,
• BS 3262 : 1989 (British Standard)
• or any other standard specified by the customer.

Application can be done by one of below methods: Formulation and application equipment varies with each method. Road Paints Industries offers material and technical support for equipment for all types of application.
1- SPRAY
2- EXTRUSION
3- SCREED
4- MANUAL

Temperature is the most important factor in the preparation and application of thermoplastic road marking paint
• When heated to the recommended temperature (200-220 deg. if spray) and properly mixed, the dry powder/granules become a homogenized liquid.
• Then, the melted thermoplastic material, when applied, forms a thermal bond between the material and the upper surface of the asphalt.
• Drop-on glass beads is sprayed immediately on the hot Thermoplastic marking for instant surface reflection.
• Also, if applied on porous surfaces, the melted thermoplastic material fills all gaps creating mechanical and thermal bond on concrete and asphalt respectively.